Skip to content
Skip to content

28 kHz

28 kHz is the coarse end of the range. The cavitation bubbles are larger and collapse harder, which is what removes heavy, bonded soil — carbon, scale, drawing compound — from robust metal parts. The same energy will erode a soft or polished surface, so it is chosen for what the part can take, not only for what is on it.

Recommended frequency
28 kHz
Products

Machines that run this frequency

LEO-6002 unit with a handled stainless steel tank and side-mounted controls
LEO-6002

30L Ultrasonic Cleaner

A 29 L commercial ultrasonic cleaner built in stainless steel throughout, at 28 / 40 / 120 kHz with 600–900 W of ultrasonic power, for electronics, 3D printing, vehicle servicing and metal stamping and machining.

Tabletop/Benchtop Digital Ultrasonic Cleaner
Tank Capacity
29L
Ultrasonic Frequency
28/40/120kHz
Ultrasonic Power
600–900W
Single Tank 1-Piece Ultrasonic Tank
L-10600

Single Tank 1-Piece Ultrasonic Tank

Custom single tank ultrasonic cleaner entrusts LEO Ultrasonic. We provide customized industrial ultrasonic cleaning machines for all walks of life to solve factory cleaning problems for you. Welcome contact us!

Industrial Ultrasonic Cleaner
Tank Capacity
40–126L
Ultrasonic Frequency
28/40kHz
Ultrasonic Power
600–1800W
Single tank 2-piece ultrasonic cleaner
L-600

Single tank 2-piece ultrasonic cleaner

A single-tank ultrasonic cleaner with the generator separated from the tank and joined by a high-frequency connector, which makes it easier to install, use and service. High ultrasonic output for pre-plating cleaning, watch parts, and hardware and machined components.

Industrial Ultrasonic Cleaner
Tank Capacity
40–126L
Ultrasonic Frequency
28/40kHz
Ultrasonic Power
600–1800W
Dual-frequency single tank integrated ultrasonic cleaner, with the control panel on the right
L2-10600

Dual Frequencies Integrated Series Single Tank Ultrasonic Cleaner

Enhance your industrial cleaning with LEO dual-frequency single tank ultrasonic cleaner. This integrated single tank ultrasonic cleaning machine is perfect for heavy industry, electronics, and medical devices, delivering precision and efficiency.

Industrial Ultrasonic Cleaner
Tank Capacity
40–99L
Ultrasonic Frequency
28–120kHz
Ultrasonic Power
600–1500W
Intelligent integrated single tank ultrasonic cleaner, with a castor-mounted cabinet and digital display panel
LS-11800

Intelligent Integrated Single Tank Ultrasonic Cleaning Machine

LEO intelligent single tank ultrasonic cleaning machine, ideal for medical and manufacturing sectors. Our single tank ultrasonic cleaner are reliable and customizable, it optimizes your cleaning processes effortlessly.

Industrial Ultrasonic Cleaner
Tank Capacity
40–132L
Ultrasonic Frequency
28/40kHz
Ultrasonic Power
600–1800W
Immersible transducer pack
LT-300

Immersible transducer pack

A transducer box and generator that convert an existing tank into an ultrasonic cleaner. The box mounts on the bottom, side or top to suit the tank, is built in stainless steel for acid and alkali resistance, and separates from the generator at a high-frequency cable connector for easier service.

Industrial Ultrasonic Cleaner
Ultrasonic Frequency
28/40kHz
Ultrasonic Power
300–1800W
LEO-V0900 commercial ultrasonic fruit and vegetable washer, stainless tank with a side control panel and castors
LEO-V0900/V1800

Commercial Ultrasonic Fruit & Vegetable Washer

Commercial ultrasonic fruit and vegetable washers LEO-V0900 and LEO-V1800: 28 kHz ultrasonics at 900 W or 1800 W, 220 V single phase, with an aeration washing unit and automatic fill and drain. The V0900 takes one basket; the V1800 doubles the tank length for two. For restaurants, hot-pot and salad kitchens, juice bars, produce wholesalers, pickling plants, food factories and staff canteens.

Ultrasonic Vegetable & Fruit Cleaner
Ultrasonic Frequency
28kHz
Ultrasonic Power
900–1800W
Contaminants

Contamination it is recommended for

Cutting fluid and machining oil: the same component before and after ultrasonic cleaning

Cutting fluid and machining oil

Cutting fluid is the oil, emulsion or synthetic coolant left on parts after turning, milling, grinding or honing. Its extreme-pressure additives bond to fresh metal and it carries swarf into every recess. Ultrasonic cleaning at 28 to 40 kHz in a warm alkaline degreaser lifts both the film and the chips.

28 / 40 kHz
Learn more
Stamping and drawing compound: the same component before and after ultrasonic cleaning

Stamping and drawing compound

Stamping and drawing compounds are the heavy, additive-loaded lubricants that let sheet metal deform without tearing. They are viscous by design, cling in draw radii and thread roots, and oxidise into varnish if heated. Ultrasonic cleaning at 28 to 40 kHz in a hot alkaline degreaser removes them before plating or welding.

28 / 40 kHz
Learn more
Carbon deposit and coking: the same component before and after ultrasonic cleaning

Carbon deposit and coking

Carbon deposit is the hard, cross-linked film that forms when oil, fuel or polymer is held hot without enough oxygen to burn away. It bonds to metal and shrugs off solvents. Removal needs a chemistry that attacks the film plus 28 kHz cavitation, or electrolysis on moulds.

28 / 40 kHz
Learn more
Oxide, rust and scale: the same component before and after ultrasonic cleaning

Oxide, rust and scale

Oxide is the metal’s own surface reacting with air and water — mill scale, heat tint, flash rust and hard water scale. It is chemically bonded to the part, not lying on it, so removal is chemical. Ultrasonic cleaning at 28 to 40 kHz keeps fresh acid at the surface and clears the loosened film.

28 / 40 kHz
Learn more
Mould release agent: the same component before and after ultrasonic cleaning

Mould release agent

Mould release agent is the silicone, wax, PTFE or soap film sprayed into a tool so the part comes out. It transfers to both, builds up in texture and vents, and repels the water that would clean it. Ultrasonic cleaning at 28 to 40 kHz with a matched chemistry strips it.

28 / 40 kHz
Learn more
Polymer melt residue: the same component before and after ultrasonic cleaning

Polymer melt residue

Polymer melt residue is the degraded, carbonised polymer that builds up wherever a melt is held hot — spinnerets, extruder screws, dies, hot runners and print nozzles. It is cross-linked and insoluble. Ultrasonic cleaning at 28 to 40 kHz, usually after a thermal or chemical pre-stage, clears the capillaries.

28 / 40 kHz
Learn more
Industries

Industries that specify it

Close-up of printed circuit board traces and solder pads

PCB & Electronics

Ultrasonic cleaning for connectors, terminals, stamped conductive parts, PCBs and FPCs, heat-dissipation parts and machined housings — flux, oil and fine particulate out of blind holes and slits.

Learn more
Two silicon wafers, their die arrays catching the light in rainbow colours

Solar & Semiconductor

Ultrasonic cleaning and centrifugal drying for silicon wafers, solar panels, quartz carriers and chamber hardware — 40, 80 and 120 kHz in one tank where the process needs all three.

Learn more
CNC spindle milling an aluminium part amid coolant mist and chips

Precision Machining & Metal Stamping

Ultrasonic cleaning for stamped parts, machined components, bearings, motor housings and steel tube — single tanks through to nine-stage automated lines with air-knife blow-off and drying.

Learn more
Surgical scissors, forceps and scalpels laid out on a blue sterile drape

Medical, Dental & Surgical Instruments

Ultrasonic cleaning for surgical instruments (including da Vinci instruments), dental and orthopaedic implants, device components and glass vials — from 6 L benchtop units to nine-stage automated lines.

Learn more
Cones of coloured yarn stacked side by side

Textile & Chemical Fibre

Ultrasonic and high-pressure spray cleaning for spinnerets, candle filters, spin packs and textile machine parts — clearing polymer residue from holes as fine as 50 microns.

Learn more
Injection-moulded plastic caps in many colours

Moulds & Dies

Ultrasonic and electrolysis cleaning for injection, die-cast, stamping and food moulds — carbon, gas residue, rust and release agent lifted off a cavity by non-contact cleaning.

Learn more
Fresh vegetables: tomatoes, peppers, radishes and potatoes

Food Processing & Commercial Kitchens

Ultrasonic dishwashers, produce washers and mould cleaning for commercial kitchens and food plants — cavitation reaches every surface evenly, lifting grease, baked-on residue and grit.

Learn more
An airliner flying beneath a blue sky with white clouds

Aerospace

Ultrasonic cleaning for aerospace maintenance and component manufacturing — starting with the single-tank lift-type machine LEO built for aircraft wheel rims.

Learn more
A car engine bay: red intake manifold, throttle body and alternator

Automotive

Ultrasonic cleaning for vehicle maintenance and automotive component manufacturing — carbon and oil off engine parts, forming oil off stamped and machined components.

Learn more
A 3D printer nozzle building a yellow part

3D Printing & Additive Manufacturing

Ultrasonic cleaning for additive manufacturing — uncured resin off SLA parts, residual powder out of SLS and metal AM lattices, and cured build-up off plates and nozzles.

Learn more
Aerial view of a container ship under way, trailing a white wake

Marine

What ultrasonic cleaning does for marine engineering — mainly filter elements, plus carbon, salt scale and oil sludge off engine components, heat exchangers and fuel system parts.

Learn more
Request a Quote

Tell us what you need cleaned

Send us the part, the contaminant and your cycle time. Our engineers size the tank, the frequency and the process chain — and reply with a sized specification for your line.

LINEPhoneRequest a Quote