
Precision Machining & Metal Stamping
Ultrasonic cleaning for stamped parts, machined components, bearings, motor housings and steel tube — single tanks through to nine-stage automated lines with air-knife blow-off and drying.
Moulds and dies are cleaned to a cosmetic standard, not just a functional one: whatever is left in the cavity is reproduced on every part that follows. The soils are baked-on release agent, resin and gas residue in vents and textures that a brush cannot reach without polishing the tool.

| Workpieces & contamination | What has to come off | Recommended frequency | Documented under |
|---|---|---|---|
| Hand tools | 28 / 40 kHz | Precision Machining & Metal Stamping | |
| Injection mould cavities and cores | 28 / 40 kHz | Moulds & Dies | |
| Mould vents and cooling channels | 28 kHz | Moulds & Dies | |
| Die-cast tooling | 28 kHz | Moulds & Dies | |
| Stamping and progressive dies | 28 / 40 kHz | Moulds & Dies | |
| Food and confectionery moulds | 28 / 40 kHz | Moulds & Dies | |
| Extrusion dies and tooling inserts | 28 / 40 kHz | Moulds & Dies | |
| Tooling in storage | 40 kHz | Moulds & Dies | |
| Baking tins and cake moulds | 28 / 40 kHz | Food Processing & Commercial Kitchens | |
| Confectionery and chocolate moulds | 28 / 40 kHz | Food Processing & Commercial Kitchens | |
| Food plant tooling and small parts | 40 kHz | Food Processing & Commercial Kitchens | |
| Carburettors and throttle bodies | 40 kHz | Automotive |

Ultrasonic cleaning for stamped parts, machined components, bearings, motor housings and steel tube — single tanks through to nine-stage automated lines with air-knife blow-off and drying.

Ultrasonic and electrolysis cleaning for injection, die-cast, stamping and food moulds — carbon, gas residue, rust and release agent lifted off a cavity by non-contact cleaning.

Ultrasonic dishwashers, produce washers and mould cleaning for commercial kitchens and food plants — cavitation reaches every surface evenly, lifting grease, baked-on residue and grit.

Ultrasonic cleaning for vehicle maintenance and automotive component manufacturing — carbon and oil off engine parts, forming oil off stamped and machined components.
Tell us what you need cleaned
Send us the part, the contaminant and your cycle time. Our engineers size the tank, the frequency and the process chain — and reply with a sized specification for your line.