
Precision Machining & Metal Stamping
Ultrasonic cleaning for stamped parts, machined components, bearings, motor housings and steel tube — single tanks through to nine-stage automated lines with air-knife blow-off and drying.
Rotating assemblies are cleaned before they are packed with their working lubricant, so the requirement is that the old grease and the wear debris in it are gone rather than redistributed. Cages, raceways and tooth roots hold both.

| Workpieces & contamination | What has to come off | Recommended frequency | Documented under |
|---|---|---|---|
| Bearings and bearing components | 40 kHz | Precision Machining & Metal Stamping | |
| Godet rollers and yarn guides | 40 kHz | Textile & Chemical Fibre | |
| Textile spindles and bobbin holders | 40 kHz | Textile & Chemical Fibre | |
| Loom and knitting machine parts | LintLubricating oilSizing residue | 28 / 40 kHz | Textile & Chemical Fibre |
| Chains, sprockets and drivetrain parts | 28 / 40 kHz | Automotive | |
| Brake calipers, pistons and hardware | 28 / 40 kHz | Automotive | |
| Motor housings and EV drive components | 28 / 40 kHz | Automotive | |
| Pistons, liners and valves | 28 kHz | Marine | |
| Shafting, gearbox and deck hardware | 28 kHz | Marine |

Ultrasonic cleaning for stamped parts, machined components, bearings, motor housings and steel tube — single tanks through to nine-stage automated lines with air-knife blow-off and drying.

Ultrasonic and high-pressure spray cleaning for spinnerets, candle filters, spin packs and textile machine parts — clearing polymer residue from holes as fine as 50 microns.

Ultrasonic cleaning for vehicle maintenance and automotive component manufacturing — carbon and oil off engine parts, forming oil off stamped and machined components.

What ultrasonic cleaning does for marine engineering — mainly filter elements, plus carbon, salt scale and oil sludge off engine components, heat exchangers and fuel system parts.
Tell us what you need cleaned
Send us the part, the contaminant and your cycle time. Our engineers size the tank, the frequency and the process chain — and reply with a sized specification for your line.