
Aerospace
Ultrasonic cleaning for aerospace maintenance and component manufacturing — starting with the single-tank lift-type machine LEO built for aircraft wheel rims.
Printed parts leave the machine still carrying the medium they were built in — uncured resin, loose powder or soluble support. Because the geometry is usually the reason the part was printed at all, the trapped material sits in internal channels and lattices that no line of sight reaches.

| Workpieces & contamination | What has to come off | Recommended frequency | Documented under |
|---|---|---|---|
| Tooling, jigs and ground support equipment | 28 kHz | Aerospace | |
| SLA / DLP resin parts | Uncured photopolymerResin pooled in recesses | 40 / 120 kHz | 3D Printing & Additive Manufacturing |
| SLS and MJF nylon parts | 40 kHz | 3D Printing & Additive Manufacturing | |
| Metal AM parts (DMLS / SLM) | 28 / 40 kHz | 3D Printing & Additive Manufacturing | |
| Conformal cooling channels and lattices | Trapped powderPartially sintered material | 28 / 40 kHz | 3D Printing & Additive Manufacturing |
| FDM parts with soluble supports | PVA / HIPS support materialStringing and surface debris | 40 kHz | 3D Printing & Additive Manufacturing |
| Build plates and print beds | 28 / 40 kHz | 3D Printing & Additive Manufacturing | |
| Powder-handling hardware and sieves | Caked powderCross-contaminating material | 28 / 40 kHz | 3D Printing & Additive Manufacturing |

Ultrasonic cleaning for aerospace maintenance and component manufacturing — starting with the single-tank lift-type machine LEO built for aircraft wheel rims.

Ultrasonic cleaning for additive manufacturing — uncured resin off SLA parts, residual powder out of SLS and metal AM lattices, and cured build-up off plates and nozzles.
Tell us what you need cleaned
Send us the part, the contaminant and your cycle time. Our engineers size the tank, the frequency and the process chain — and reply with a sized specification for your line.