

Industrial Ultrasonic Cleaning Agents
Looking for an ultrasonic cleaning agent? LEO Ultrasonic develops its own range of industrial cleaning agents that, combined with ultrasonic equipment, remove stubborn soils in machining, electronics and optoelectronics. Order line: +886-2-89706260
Overview
About this series
Industrial ultrasonic cleaning agents and detergents
Water-based specialty cleaner series
Water-based degreaser series
- n-Propyl bromide (nPB) series
- Metal rust preventive series
- Hydrocarbon solvent series
Water-based specialty cleaner series
This series of ultrasonic cleaning agents is developed in-house for process requirements specific to individual industries. It outperforms imported equivalents and helps customers resolve the process problems that arise from inconsistent cleaning results, cost and stock-holding.
Models & specifications
Scroll the table sideways to see every model.
| Specification | All models |
|---|---|
| LEO-117 | Appearance: White liquid · pH: 13 · Properties: Strong adhesive remover, dilutes well · Application: Powerful, environmentally friendlier remover for adhesive moulds, resins and peelable coatings · Method: Ultrasonic, immersion |
| LEO-126 | Appearance: Pale yellow liquid · pH: 12.6 · Properties: High strength · Application: For use with an electrolytic ultrasonic cleaner. Removes stubborn deposits from mould faces and cavities — gas residue, carbides, sulphides, release agent, resin and pigment residue · Method: Ultrasonic electrolysis |
| LEO-108 | Appearance: Pale yellow liquid · pH: 10 · Properties: Low foaming · Application: Machining oils and rust-preventive oils on ferrous and non-ferrous metals · Method: Ultrasonic, spray |
| LEO-111Y | Appearance: Pale yellow liquid · pH: 12.5 · Properties: Low foaming · Application: General oils, stamping oil, quenching oil, cutting fluid and rust-preventive oil · Method: Ultrasonic, spray |
| LEO-121 | Appearance: Pale yellow liquid · pH: 12.5 · Properties: High strength · Application: Machining oils and polishing compound on ferrous and non-ferrous metals · Method: Ultrasonic, immersion |
| LEO-112Y | Appearance: Pale yellow liquid · pH: 12.8 · Properties: High strength · Application: Adhesive residue and ink on precision electronic parts; PCB flux removal · Method: Ultrasonic, immersion |
| LEO-113 | Appearance: Pale yellow liquid · pH: 13 · Properties: High strength · Application: Carbon deposits on memory cards; suction-cup marks · Method: Ultrasonic, immersion |
| LEO-116 | Appearance: Pale yellow liquid · pH: 7 · Properties: Neutral · Application: For precision glass. Rinses off easily and leaves no residue · Method: Ultrasonic, immersion |
| LEO-102 | Appearance: Pale yellow liquid · pH: 1.5 · Properties: High strength · Application: Oil, yellow staining and water marks on stainless steel. NSF certified for use on food machinery · Method: Ultrasonic, immersion |
| LEO-104 | Appearance: Pale yellow liquid · pH: 2.5 · Properties: High strength · Application: Removes rust from steel and leaves short-term rust protection · Method: Ultrasonic, immersion |
| LEO-131 | Appearance: Pale yellow liquid · pH: 1 · Properties: Low foaming · Application: Heavy-duty degreasing of copper and aluminium; removes metal oxides · Method: Ultrasonic, spray |
| LEO-700B | Specific gravity (15°C, water = 1): 1.35 · Evaporation rate (n-BuAc = 100): 700 · Application: Readily removes flux, polishing compound, rust-preventive oil, machining oil, stamping oil and similar soils · Method: Ultrasonic, immersion |
| LEO-170 | Appearance: Pale yellow liquid · pH: 10.8 · Properties: Low foaming · Application: In-process rust prevention for steel and cast iron; short to medium-term protection after a water rinse · Method: Immersion, spray |
| LEO-171 | Appearance: Colourless liquid · pH: 7 · Properties: Low foaming · Application: Anti-oxidation for copper, aluminium and other light metals; keeps the original lustre · Method: Immersion, spray |
| LEO-150I | Specific gravity (15°C, water = 1): 0.73 · Evaporation rate (n-BuAc = 100): 150 · Application: Flux, water-soluble cutting fluid, lard oil and stamping oil; also water displacement and drying after rinsing · Method: Ultrasonic, immersion |
Industries this serves

Tell us what you need cleaned
Send us the part, the contaminant and your cycle time. Our engineers size the tank, the frequency and the process chain — and reply with a sized specification for your line.








