Skip to content
Skip to content

120 kHz

120 kHz is the fine end: bubbles small enough to lift sub-micron particulate without attacking the surface underneath. It is the band for optics, wafers and precision-lapped faces, where acceptance is measured by particle count.

Recommended frequency
120 kHz
Products

Machines that run this frequency

3L Ultrasonic Cleaner
LEO-1002

3L Ultrasonic Cleaner

A 3 L benchtop ultrasonic cleaner with digital timer and temperature control, available at 40 or 120 kHz, for laboratories, optical shops, the jewellery trade and dental practices.

Tabletop/Benchtop Digital Ultrasonic Cleaner
Tank Capacity
3L
Ultrasonic Frequency
40/46/120kHz
Ultrasonic Power
100W
4.5L Laboratory Ultrasonic Cleaner
LEO-1502

4.5L Laboratory Ultrasonic Cleaner

A 4.5 L benchtop ultrasonic cleaner with digital timer and temperature control, available at 40 or 120 kHz, for laboratories, optical shops, the jewellery trade and dental practices.

Tabletop/Benchtop Digital Ultrasonic Cleaner
Tank Capacity
4.5L
Ultrasonic Frequency
40/46/120kHz
Ultrasonic Power
150W
LEO-3002 benchtop dental ultrasonic cleaner with the drain hose fitted
LEO-3002

Dental Ultrasonic Cleaner Machine

A 10.5 L benchtop ultrasonic cleaner at 40 or 120 kHz with 300 W of ultrasonic power, for laboratories, 3D printing, wafer and semiconductor work, and dental practices.

Tabletop/Benchtop Digital Ultrasonic Cleaner
Tank Capacity
10.5L
Ultrasonic Frequency
40/120kHz
Ultrasonic Power
300W
LEO-400 series ultrasonic cleaner

LEO-400 Series

A 22 L benchtop ultrasonic cleaner at 40 or 120 kHz, with 400 W of ultrasonic power and a 400 W heater, for electronics, 3D printing, wafer and semiconductor work, and bicycle, motorcycle and car servicing.

Tabletop/Benchtop Digital Ultrasonic Cleaner
Tank Capacity
22L
Ultrasonic Frequency
40/120kHz
Ultrasonic Power
400W
LEO-6002 unit with a handled stainless steel tank and side-mounted controls
LEO-6002

30L Ultrasonic Cleaner

A 29 L commercial ultrasonic cleaner built in stainless steel throughout, at 28 / 40 / 120 kHz with 600–900 W of ultrasonic power, for electronics, 3D printing, vehicle servicing and metal stamping and machining.

Tabletop/Benchtop Digital Ultrasonic Cleaner
Tank Capacity
29L
Ultrasonic Frequency
28/40/120kHz
Ultrasonic Power
600–900W
2L Ultrasonic Cleaner
LEO-803

2L Ultrasonic Cleaner

A 2 L benchtop ultrasonic cleaner with digital timer, temperature control and a 50 W heater, available at 40 or 120 kHz, for laboratories, optical shops and the jewellery trade.

Tabletop/Benchtop Digital Ultrasonic Cleaner
Tank Capacity
2L
Ultrasonic Frequency
40/46/120kHz
Ultrasonic Power
80W
Dual-frequency single tank integrated ultrasonic cleaner, with the control panel on the right
L2-10600

Dual Frequencies Integrated Series Single Tank Ultrasonic Cleaner

Enhance your industrial cleaning with LEO dual-frequency single tank ultrasonic cleaner. This integrated single tank ultrasonic cleaning machine is perfect for heavy industry, electronics, and medical devices, delivering precision and efficiency.

Industrial Ultrasonic Cleaner
Tank Capacity
40–99L
Ultrasonic Frequency
28–120kHz
Ultrasonic Power
600–1500W
Three-frequency single tank integrated ultrasonic cleaner, with the control panel on the right
L3-10600

Three Frequencies Single Tank Ultrasonic Cleaner

Optimize cleaning with LEO single tank ultrasonic cleaning machine featuring three frequencies (40, 80, 120 kHz). Our three frequencies single tank ultrasonic cleaner is perfect for metal parts to sensitive optics, ensuring versatile and precise results.

Industrial Ultrasonic Cleaner
Tank Capacity
40–99L
Ultrasonic Frequency
40/80/120kHz
Ultrasonic Power
600–1500W
Contaminants

Contamination it is recommended for

Particulate and metal fines: the same component before and after ultrasonic cleaning

Particulate and metal fines

Particulate contamination is loose solid matter — metal fines, swarf, glass and silicon dust, abrasive grit — held on a surface by static charge, surface tension and geometry rather than by chemistry. Nothing dissolves it. High-frequency ultrasonic cleaning at 80 to 120 kHz lifts particles and filtration takes them out.

80 / 120 kHz
Learn more
Industries

Industries that specify it

Close-up of printed circuit board traces and solder pads

PCB & Electronics

Ultrasonic cleaning for connectors, terminals, stamped conductive parts, PCBs and FPCs, heat-dissipation parts and machined housings — flux, oil and fine particulate out of blind holes and slits.

Learn more
Two silicon wafers, their die arrays catching the light in rainbow colours

Solar & Semiconductor

Ultrasonic cleaning and centrifugal drying for silicon wafers, solar panels, quartz carriers and chamber hardware — 40, 80 and 120 kHz in one tank where the process needs all three.

Learn more
A row of coated optical lens elements with coloured coating reflections

Optics, Glass & Lenses

Ultrasonic cleaning for optical glass, resin spectacle lenses, contact lenses, phone cover glass and camera modules — and the pre-ovens, drying ovens and hardening machines around them.

Learn more
Surgical scissors, forceps and scalpels laid out on a blue sterile drape

Medical, Dental & Surgical Instruments

Ultrasonic cleaning for surgical instruments (including da Vinci instruments), dental and orthopaedic implants, device components and glass vials — from 6 L benchtop units to nine-stage automated lines.

Learn more
A car engine bay: red intake manifold, throttle body and alternator

Automotive

Ultrasonic cleaning for vehicle maintenance and automotive component manufacturing — carbon and oil off engine parts, forming oil off stamped and machined components.

Learn more
A 3D printer nozzle building a yellow part

3D Printing & Additive Manufacturing

Ultrasonic cleaning for additive manufacturing — uncured resin off SLA parts, residual powder out of SLS and metal AM lattices, and cured build-up off plates and nozzles.

Learn more
Request a Quote

Tell us what you need cleaned

Send us the part, the contaminant and your cycle time. Our engineers size the tank, the frequency and the process chain — and reply with a sized specification for your line.

LINEPhoneRequest a Quote