Skip to content
Skip to content
Perspective

Three things people get wrong when they specify an ultrasonic cleaner

Most specifications we receive describe the tank. Almost none describe the rinse, the dry, or the test that decides whether the part is clean — which is where the process usually fails.

The first is buying tank size from part size. A basket that fits the part is the minimum, not the specification: parts need clearance around them for the liquid to move, they cannot be stacked into a solid block, and a tank loaded to its geometric limit cleans the outside of the load and polishes nothing in the middle. Specify the batch you actually want to run per cycle, and let the tank follow from it.

The second is specifying the wash and forgetting the rinse. Ultrasonic cleaning lifts soil into the bath; it does not remove it from the building. If the part comes out of a loaded bath and dries on the rack, the soil that was suspended in the liquid dries back onto the surface, and the result can measure worse than not cleaning at all. Cascade rinsing exists for this reason, and it is the stage most often cut from a quotation to reach a price.

The third is having no acceptance test. "Clean" is not a specification; it is an opinion, and it changes with the person holding the part up to the light. A particle count, a solvent-extract resistivity reading, a water-break test, a gravimetric weight — any of them turns cleaning into something that can be argued about with evidence. Without one, nobody can tell whether a process drifted, and nobody can tell whether a new machine is better than the old one.

None of these are exotic. They are the three questions our engineers ask before quoting, and the reason a specification that answers them gets a useful proposal back instead of a price for a tank.

Perspective

Request a Quote

Tell us what you need cleaned

Send us the part, the contaminant and your cycle time. Our engineers size the tank, the frequency and the process chain — and reply with a sized specification for your line.

LINEPhoneRequest a Quote