Skip to content
Skip to content
Perspective

In-house or outsourced cleaning: the question is who owns the spec

Outsourcing cleaning moves the equipment off your floor; the responsibility for the cleanliness standard stays with you. Keeping the two distinct is what makes the arrangement work.

Outsourcing looks like the low-risk option: no capital, no floor space, no effluent, no one to train. For low volumes and undemanding parts it often is. The arrangement gets difficult at exactly the point where cleaning starts to matter — when the part is inspected afterwards and someone has to say whether it passed.

A cleaning subcontractor can only work to the standard you give them. If the purchase order says "clean", they will clean to whatever their standard process produces, and that process was designed around their other customers' parts. The result may be fine. It will not be specified, and when a batch fails there is no document that says what should have happened.

So the useful way to frame the decision is not in-house versus outsourced. It is: do you own a written cleaning specification — frequency, temperature, time, chemistry, rinse, dry, and the test that decides pass or fail? If you do, outsourcing is a manufacturing choice and a perfectly good one; you are buying capacity against a spec you control. If you do not, bringing it in-house is often the cheaper way to develop the spec, because you can change one variable at a time on your own parts and see what it does.

A common middle path is worth naming: develop the process on a benchtop or single-tank machine in-house, write down what worked, then outsource volume against that document. The equipment is cheap at that scale, and what you are really buying is the authority to specify.

Perspective

Request a Quote

Tell us what you need cleaned

Send us the part, the contaminant and your cycle time. Our engineers size the tank, the frequency and the process chain — and reply with a sized specification for your line.

LINEPhoneRequest a Quote